Physical Properties Testing and Inspection: PS1, PS60, PT36
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PS1 | 6635-00-620-2890 | Penetrameter set | Andreasen Agenturer A/S Holger (R0008) | ||
| PS-101 PS101 | 6635-00-641-2661 | Fluorescent Penetrant Inspection | Special Features: Integral design, components, 1 curtain enclosed inspection table W/one black light, 1 tank developing powder 14-3/4 in. by 33-1/4 in. W/drain grille, 1 tank, dip 15-3/4 in. by 33-1/4 in., 1 tank, rinse 14-3/4 in. by 33-3/4 in. W/one black light; spray type rinse tank;dim. data, 132 in. lg O/A, 56 in. W O/A, 80 in. H O/A, 36 in. H to top of table;electric power requirements, 220 to 440V, 60 cycles, single phase | Solid State Systems Inc. (1DU02) | |
| PS20 | 6635-00-357-4611 | Testing Machine, Tension | General Characteristics Item Description: Horizontal clearance between screws and columns 22 in. min. vertical tension compression space 50 in. min. wiring for 230 volts, 60 hertz, 1 phase motor. loading speed continuously variable from at least A range of .025 to 2 in. per minute up to max. of at least 30, 000 lb. adjusting speed not less than 10 in. per minute min. four scale ranges covering collectively the range from zero to max. machine rating with all scales having A common zero. smallest scale will cover from 0 to 10 percent of machine's max. rating, reading out in one pound increments, and the largest scale covering from 0 to max. machine rating reading in 10 lb. increments. scales shall have digital display. accuracy to be plus or minus one percent of the indicated load or plus or minus 1/10 of one percent of each scale range capacity whichever isgreater | Page-Wilson Corp. (82729) | |
| PS-2M PS2M | 6635-01-102-2924 | Scanner, Eddy Current | General Characteristics Item Description: Functions as motorized helical scan probe drive unit for inspection of bolt holes or tubing ends; var speed control from 8 to 60 rpm; 40 rev per in.pitch; power 115/230 vac; limit & clutch switches; 0.188 to 1.500 in.absolute or differential probes; handheld orw/test fixture | Olympus NDT NE Inc. (29192) | |
| PS302378-05 PS30237805 | 6635-01-519-4560 | Transducer, Ultrasonic Test | Special Features: Ptc self-resetting fuse; 50 khz ultrasound END Item Identification: CP140 flight deck simulator and cockpit procedures trainer Overall Length: 7.625 inches nominal | CAE Inc. (35181) | |
| PS348510-01 PS34851001 | 6635-01-497-7325 | Transducer, Ultrasonic Test | Special Features: 1.0MHZ; submersible electrical connection; weatherproof junction box END Item Identification: Fuel fill control system, wasp class lhd Mounting Method: Clamp | CAE Inc. (35181) | |
| PS-5 PROBE KIT AF PS5PROBEKITAF | 6635-01-415-9099 | Probe set, Eddy Current | Major Components: PROBES:PS5/200KHZ-1MHZ/RD.156; PS5/200KHZ-1MHZ/RD.187; PS5/200KHZ-1MHZ/RD.218; PS5/200KHZ-1MHZ/RD.250; PS5/200KHZ-1MHZ/RD.281; PS5/200KHZ-1MHZ/RD.312; PS5/200KHZ-1MHZ/RD.343; PS5/200KHZ-1MHZ/RD.375; PS5/200KHZ-1MHZ/RD.406; PS5/200KHZ-1MHZ/RD.437; PS5/200KHZ-1MHZ/RD.468; PS5/200KHZ-1MHZ/RD.500; PS5/200KHZ-1MHZ/RD.531; PS5/200KHZ-1MHZ/RD.562; PS5/200KHZ-1MHZ/RD.593; PS5/200KHZ-1MHZ/RD.625; PS5/200KHZ-1MHZ/RD.656; PS5/200KHZ-1MHZ/RD.687; PS5/200KHZ-1MHZ/RD.718; PS5/200KHZ-1MHZ/RD.750; nameplate; carrying case W/cutouts for probes Internal Battery Accommodation: Not included Material and Location: Aluminum carrying case | Olympus NDT NE Inc. (29192) | |
| PS60 | 6635-00-487-0134 | Tester, cable Tensiometer | Special Features: 60000 lb capacity, 60.000 in.W by 28.000 in.deep by 74.000 in.H | Page-Wilson Corp. (82729) | |
| PSFM-1224 PSFM1224 | 6635-01-263-9367 | Presetting Machine, Cutting Tool, | Special Features: Kmax lg setting 24.000 in., max dia setting 12.000 in.;accuracy:length & dia porm 0.001;POWER:110VAC, variable speed length travel;mech and elec overload PROTECTION;CART;3-POINT adjustable non-skid leveling screws | Command Corp. Intl (70002) | |
| PSM-1/8 X 4.25 BNC PSM18X425BNC | 6635-01-116-6387 | Probe, Eddy Current | Overall Length: 4.500 inches nominal Overall Diameter: 0.125 inches nominal End Item Identification: F-16A/B | Tyvin Corp. (0VPD4) | |
| PT | 6635-00-526-6210 | Tester, Material Strength | Special Features: Portable type mtg;horizontal operation;designed to make elongation test 8 in. max capacity;range 0 to 4000 psi W/50 lb smallest geaduation;hand screw type load system Indicator Type: Indicator dial Scale Quantity: 1 | Detroit Testing Machine Co. (17372) | |
| PT06784-A PT06784A | 6635-01-212-7065 | Holder, Gauge Assembly | END Item Identification: 6635-00-411-3728 test set, soil General Characteristics Item Description: 9.620 in. lg; 0.369 in. min dia, 0.375 in. max dia | The L S Starrett Company (57163) | |
| PT-18 PT18 | 6635-00-249-5340 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, emulsification, drain, rinse, hot air recirculating dryer, developer, & inspection stations;int. tank size 33.000 in. lg, 16.000 in. W, 14.000 in. h;structural stl frame angles, 16 gage carbon stl TANKS;50 to 500 deg. F thermostat CONTROL;220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-1 type | Federal Specifications (81348) | |
| PT-18 PT18 | 6635-01-137-2627 | Fluorescent Penetrant Inspection | Federal Specifications (81348) | ||
| PT-18 PT18 | 6635-01-284-0206 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant station; drain station; rinse station; dryer station; developer station & inspection station | Federal Specifications (81348) | |
| PT18 | 6635-01-503-4776 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, emulsification, drain, rinse, hot air recirculating dryer, developer, & inspection stations; int. tank size 33" L, 16" W, 14" h; structural steel frame; 50 to 500 deg F thermostat control; 220 or 440 vac; built in xfrmr 115VAC; includes hour/minute/ second clock visible in black light | Gould & Bass Company Inc. (7Z769) | |
| PT-2 PT2 | 6635-01-589-4748 | Tensiometer, Dial Indicating | Special Features: Material: anodized aluminum , cable size: 5MM , 6MM, 7MM or 3/16 inch , 7/32 inch , 1/4 inch, accurately to within + or - 5% measuring cable tension Scale Quantity: 1 | Loos & Co. Inc. (65196) | |
| PT-24 PT24 | 6635-01-483-0552 | Fluorescent Penetrant Inspection | Component Document Origin: Government Document Type: Military specification Special Features: Frame size 24 in long; 34 in wide; 36 in tall; tank size 22 in long, 29IN wide; 20 in deep | Federal Specifications (81348) | |
| PT24 | 6635-01-503-4145 | Fluorescent Penetrant Inspection | Special Features: Frame size 24" l; 34" w; 36" h: tank size 22" l; 29" w; 20" D.: hours/minutes/seconds clock that is readable in black light Reference Data AND Literature: A-A-58080 and engineering data list FD2060-02-71964 Supplementary Features: Consists of the following sections: penetrant tank, penetrant drain, pre-rinse, remover-rinse, developer, developer drain; dryer, reat & inspection stations. | Gould & Bass Company Inc. (7Z769) | |
| PT-2M PT2M | 6635-01-615-0954 | Tensiometer, Dial Indicating | Carrying Case: Not provided Scale Quantity: 1 Scale Range: +0.0 to 45.0 kilograms | Kylmar KMC Limited (U8942) Loos and Co. Inc. (0DZJ8) | |
| PT-36 PT36 | 6635-01-483-0548 | Fluorescent Penetrant Inspection | Component Document Origin: Government Document Type: Military specification Special Features: Frame size 36 in long; 34 in wide; 36 in tall;tank size 33 in long; 29 in wide; 26 in deep | Federal Specifications (81348) | |
| PT36 | 6635-01-503-4377 | Fluorescent Penetrant Inspection | Special Features: Frame size 36" L, 34" W, 36" h; tnak size 33" L, 29" W, 26" deep; hours/minutes/seconds clock that is readable in blacklight Reference Data AND Literature: A-A-58050 and engineering data list FD2060-02-71964 Supplementary Features: Consists of the following sections: penetrant tank, penetrant drain, pre-rinse, remover-rinse, developer, developer drain, dryer, rest & inspectionstations | Gould & Bass Company Inc. (7Z769) |