Physical Properties Testing and Inspection: MIC1, MILI26343, MILM6867TYPE3
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| MIC1 | 6635-01-240-0160 | Tester, Material Hardness | Carrying Case: Provided Installation Design: Portable Indicator Type: Digital counter | Agfa NDT Inc. (52039) | |
| MIC205AL | 6635-01-608-8894 | Manual Probe | Agfa NDT Inc. (52039) | ||
| MICROSCANNER E MICROSCANNERE | 6635-01-524-8563 | Probe, Eddy Current | Special Features: 0LOCATES shorts, loose connections, bad components by scanning; no batteries required; 3 inch target distance; operating temperature -46/+80 degrees c; impact resistant; hermetically sealed; intrinsically safe; clips to standard probe holder Part Name Assigned BY Controlling Agency: Infrared probe Overall Length: 6.800 inches nominal | Exergen Corp. (67424) | |
| MIL-C-12044 MILC12044 | 6635-00-371-9685 | Chest, Soil Sampling Equipment | Departure From Cited Document: Item 68 | Military Specifications (81349) | |
| MIL-C-12044 MILC12044 | 6635-01-106-7755 | Chest, Soil Test set | Overall Length: 2.823 feet nominal Overall Width: 0.843 feet nominal Overall Height: 1.240 feet nominal | Military Specifications (81349) | |
| MILC12044 | 6635-00-371-9686 | Chest, Soil Test set | Overall Length: 4.312 feet nominal Overall Width: 1.885 feet nominal Overall Height: 1.583 feet nominal | Military Specifications (81349) | |
| MILC12044 | 6635-00-527-5996 | Chest, 1-1-1 Trichloroethane, Tech | General Characteristics Item Description: MIL-C-12044; dwg D-4318-1 | Military Specifications (81349) | |
| MIL-C-43011 MILC43011 | 6635-00-679-5760 | Carrying Case, Test set, Soil Traf | Departure From Cited Designator: As modified by eng dwg D-13200E9847 thru 9848 and 13200E9860 thru 9879 | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-00-134-1408 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer, developer drain, hot air recirculating dryer, cooler, & inspection stations;int. tank size 43.000 in. lg., 29.000 in. W, 26.000 in h;structural stl frame angles, 16 gage carbon stl TANKS;50 to 500 deg. F thermostat CONTROL;220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-2 type | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-00-249-5340 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, emulsification, drain, rinse, hot air recirculating dryer, developer, & inspection stations;int. tank size 33.000 in. lg, 16.000 in. W, 14.000 in. h;structural stl frame angles, 16 gage carbon stl TANKS;50 to 500 deg. F thermostat CONTROL;220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-1 type | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-00-249-5341 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer, developer drain, hot air recirculating dryer, cooler, & inspection stations;int. tank size 67.000 in. lg, 44.000 in. W, 26.000 in. h;structural stl frame angles, 16 gage carbon stl tanks; 50 to 500 deg. F thermostat control; 220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-3 type | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-00-334-7420 | Fluorescent Penetrant Inspection | Special Features: O/A dsim. 42.000 ft. lg, 7.500 ft W, 7.333 ft h;accommodates matl up to 48.000 in. lg, 43.000 in. W, 43.000 in. h;c/O wet developer, rinse, & dryer stations and inspection booth;int. tank size 67.000 in. lg, 44.000 in. W;26.000 in. h;structural stl frame angles, 16 gage carbon stl tanks; 50 to 500 deg. F thermostat control; 110 and 220 vac I/P W/5 or 15 or 45 amp power consumption;built-in xfrmr 110 or 120 v;cognizant service:air force Functional Description: Used to inspect ferrous & non-ferrous matl using non-destructive fluorescent penetrant method of inspection; detects flaws or cracks in aluminum, brass, copper, cast iron, stls stl, magnesium & non-magnetic matl in addition to ferrous matl Reference Data AND Literature: To 33B1-2-6-1 & 33B1-2-6-4 | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-01-073-0086 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer, developer drain, hot air recirculating dryer, cooler, & inspection stations;int. tank size 43.000 in. lg, 29.000 in. W, 26.000 in. h;structural stl frame angles, 16 gage carbon stl TANKS;50 to 500 deg. F thermostat CONTROL;220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-2 type | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-01-103-3380 | Fluorescent Penetrant Inspection | Military Specifications (81349) | ||
| MIL-F-38762 MILF38762 | 6635-01-347-8996 | Fluorescent Penetrant Inspection | Special Features: 29 in. w; 43 in lg; 26 in. deep; C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer, developer drain, dryer, cooler, inspection stations Document Type: Military specification Component Document Origin: Government | Military Specifications (81349) | |
| MIL-F-38762 MILF38762 | 6635-01-377-4300 | Fluorescent Penetrant Inspection | Military Specifications (81349) | ||
| MILF38762 | 6635-00-110-9463 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer drain, dryer, cooler and inspection stations, the penetrant, emulsification, developer stations, C/O frame, tank and cover, id of tank, 43.000IN. lg., 29.000 in.W, 26.000 in. deep, rinse station tank id 43.000 in. LG.29.000 in. W, 24.000 in. deep, frame size, 48.000 in. lg, 34.000 in. W, table 36.000 in. H, dryer station dim. 67.000 in. lg, 28.000 in. W, 24.000 in. H, heater capacity 8000 W, two fans, cooler station C/O frame and full roller grille, 48.000 in. lg, 34.000 in. W, table lg 36.000, inspection station C/O frame, roller grille table top, dust pan, exaust fan, two black lights, junction box and canopy, O/a dim. 72.000 in. lg, 58.000 in. W, 78.000IN.H, all frames are of structural steel angles, tanks are of 16 guage carbon steel, dryer stations hot-air recirculating type, thermostat control from 50 deg. F to 500 deg. F Nondefinitive Spec/STD Data: MA-2 type | Military Specifications (81349) | |
| MILF38762 | 6635-00-334-7419 | Fluorescent Penetrant Inspection | Special Features: C/O penetrant, penetrant drain, emulsification, emulsification drain, rinse, developer, developer drain, hot air recirculating dryer, cooler, & inspection stations;int. tank size 43.00 in. lg, 29.000 in. W, 26.000 in. h;structural stl frame angles, 16 gage carbon stl TANKS;50 to 500 deg. F thermostat CONTROL;220 or 440 V line, built-in xfrmr 110 or 120 V Nondefinitive Spec/STD Data: MA-2 type | Military Specifications (81349) | |
| MIL-HDBK-300(AGE-N) MILHDBK300AGEN | 6635-01-583-9820 | Tensiometer, Dial Indicating | Part Name Assigned BY Controlling Agency: Ap dynamometer Carrying Case: Provided Functional Description: 5IN diameter 4000LB capacity used for critical and overhead lifting applications | MIL-Hdbk-300 (1HBK1) | |
| MIL-HDBK-300(AGE-P) MILHDBK300AGEP | 6635-01-573-5911 | Balancing Machine, Dynamic-Static | MIL-Hdbk-300 (1HBK1) | ||
| MIL-HDBK-300(AGE-P) MILHDBK300AGEP | 6635-01-578-4891 | Fluorescent Penetrant Inspection | MIL-Hdbk-300 (1HBK1) | ||
| MIL-HDBK-300(AGE-P) MILHDBK300AGEP | 6635-01-579-7856 | Balancing Machine, Dynamic-Static | Part Name Assigned BY Controlling Agency: Horizontal dyanmic balancing system for drive shafts Functional Description: Used to balance drive shafts on A lathe type setup to approximately 4000RPM Current Type: AC | MIL-Hdbk-300 (1HBK1) | |
| MIL-HDBK-300(ATS# MILHDBK300ATS | 6635-01-581-9996 | Tensiometer, Dial Indicating | MIL-Hdbk-300 (1HBK1) | ||
| MIL-HDBK-300(PME) MILHDBK300PME | 6635-01-571-2966 | Tester, Torque Wrench | Part Name Assigned BY Controlling Agency: Torque wrench calibrator Functional Description: Torque and tension calibrator with two stations. low torque for wrenches and screwdrivers and high torque for torque, tension, and force Relationship TO Similar Equipment: Generic for 6635-01-327-4461 | MIL-Hdbk-300 (1HBK1) | |
| MIL-HDBK-300(PME) MILHDBK300PME | 6635-01-587-1661 | Gage, Force | Special Features: 500 lbs, 250 kg, 2500 N force Part Name Assigned BY Controlling Agency: Digital force gauge for load comparison Functional Description: Push-pull force gage ideal for job task analysis and ergonomic evaluations | MIL-Hdbk-300 (1HBK1) | |
| MIL-HDBK-300(PME) MILHDBK300PME | 6635-01-598-0718 | Test set, Ultrasonic | Special Features: 282MM H X 171 W X 159 d; nimh battery or line voltage operation; lcd display; RS232 interface; 0.25 to 25MHZ freq range Part Name Assigned BY Controlling Agency: Portable ultrasonic flaw detector Carrying Case: Provided | MIL-Hdbk-300 (1HBK1) | |
| MIL-HDBK-300(PME) MILHDBK300PME | 6635-01-604-1480 | Tester, Spring Resiliency | Special Features: Handles included, 4 to 7 inch rod accessory, 5/16-18 threads Part Name Assigned BY Controlling Agency: Tester, spring resiliency Functional Description: Manually operated push/pull force gauge | ||
| MIL-I-26343 MILI26343 | 6635-01-017-1694 | Detector, Moisture Content | Furnished Items and Quantity: Probe unit 1; carrying case 1 III TIP Termination Type: Probe Conductor Attachment Method: Probe connection 1/4 inch diameter | Military Specifications (81349) | |
| MILI26343 | 6635-00-578-5203 | Detector, Moisture Content | Special Features: Direct reading colored comparator scale for instantaneous indication of moisture; includes carrying case and charging cord; item consists of 2 basic components: electrode gun and metering unit connected by 3 ft cable; scale calibrated specifically for radomes; includes low battery charge indication TIP Termination Type: Probe TIP Replaceability Feature: Included | Military Specifications (81349) | |
| MILI26343 | 6635-00-646-8767 | Detector, Moisture Content | Special Features: Direct reading colored comparator scale for instantaneous indication of moisture; includes carrying case and charging cord; item consists of 2 basic components: electrode gun and metering unit connected by 3 ft cable; scale calibrated specifically for radomes; includes low battery charge indication TIP Termination Type: Probe TIP Replaceability Feature: Included | Military Specifications (81349) | |
| MILI6867 | 6635-00-055-6596 | Magnetic Inspection unit, Station | Current Type: AC Voltage IN Volts: 200.0 and 460.0 Frequency IN Hertz: 50.0 or 60.0 | Military Specifications (81349) | |
| MILI6867 | 6635-00-526-4534 | Magnetic Inspection unit, Portabl | Special Features: 4-WHEEL caster mobile unit Current Type: AC Voltage IN Volts: 200.0 and 460.0 | Military Specifications (81349) | |
| MILI6867 | 6635-00-580-9892 | Magnetic Inspection unit, Portabl | Special Features: 30 pos cont switch; demagnetization Functional Description: Used to inspect ferromagnetic materials and parts by means of the magnetic particle inspection method. Current Type: AC | Military Specifications (81349) | |
| MILI6867ACLASS26TYPE3 | 6635-00-526-4534 | Magnetic Inspection unit, Portabl | Special Features: 4-WHEEL caster mobile unit Current Type: AC Voltage IN Volts: 200.0 and 460.0 | Military Specifications (81349) | |
| MILI6867ACLASS26TYPE3 | 6635-00-580-9892 | Magnetic Inspection unit, Portabl | Special Features: 30 pos cont switch; demagnetization Functional Description: Used to inspect ferromagnetic materials and parts by means of the magnetic particle inspection method. Current Type: AC | Military Specifications (81349) | |
| MILM23527 | 6635-00-917-2255 | Magnetic Inspection unit, Portabl | FSC Application Data: Physical properties testing equipment | Military Specifications (81349) | |
| MILM6867 | 6635-00-349-2561 | Magnetic Inspection unit, Portabl | Special Features: Metal cabinet; ac or dc magnetization Overall Height: 40.000 inches nominal Current Type: AC | Military Specifications (81349) | |
| MILM6867 | 6635-00-361-4591 | Magnetic Inspection unit, Station | Current Type: AC Voltage IN Volts: 200.0 and 460.0 Frequency IN Hertz: 50.0 or 60.0 | Military Specifications (81349) | |
| MILM6867 | 6635-00-361-4631 | Magnetic Inspection unit, Station | Special Features: Item is A magnetic part inspection unit Current Type: AC Voltage IN Volts: 200.0 and 460.0 | Military Specifications (81349) | |
| MILM6867 | 6635-00-557-5916 | Magnetic Inspection unit, Station | Special Features: Cir and long type magnetication; horizontal-type operation; 96 in. max head opening; air cylinder operated head stock; hand crank operated tail stock Current Type: AC Voltage IN Volts: 220.0 | Military Specifications (81349) | |
| MILM6867 | 6635-00-566-5197 | Magnetic Inspection unit, Portabl | Special Features: 750 amp, high amperage magnetizing current is ac, half wave rectified current Current Type: AC Phase: Single | Military Specifications (81349) | |
| MIL-M-6867C MILM6867C | 6635-00-566-9772 | Magnetic Inspection unit, Station | Special Features: Cir and long type magnetization; hd/tail stock hor type oper 54 in. max hd opening air cyl oper hd stock hand crank oper tail stock; wet intermittent type method inspection Current Type: AC Voltage IN Volts: 220.0 | Military Specifications (81349) | |
| MIL-M-6867C MILM6867C | 6635-01-366-6791 | Magnetic Inspection unit, Station | Current Type: AC Voltage IN Volts: 220.0 and 460.0 Frequency IN Hertz: 50.0 or 60.0 | Military Specifications (81349) | |
| MILM6867TYPE3 | 6635-00-526-4534 | Magnetic Inspection unit, Portabl | Special Features: 4-WHEEL caster mobile unit Current Type: AC Voltage IN Volts: 200.0 and 460.0 | Military Specifications (81349) |