Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments: FT4-8AEYBBLEA-0/LN-5-C-MA1, FT-6-8A5-LJG, FT8-AEU3ULEA-1
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| FT4-8AEYBBLEA-0/LN-5-C-MA1 FT48AEYBBLEA0LN5CMA1 | 6680-01-530-1292 | Transmitter, Rate of Flow | END Item Identification: 7385926 (53711) fwd propulsion section assy, rmv Special Features: 2LINEAR link high performance turbine meter system; rf carrier signal input; analog output: 4 ma min and 20 ma max; connector: mating 10-PIN ms connector, 15-91741-01; operating temp: -40 deg fahrenheit min and 185 deg fahrenheit max; 5800 psi; 0.05% repeatability; 0.5% linearity; material: cres type 316; order with the following conditions: calibrated for fuel having kinematic viscosity of 2.8 cst and flow rate of 1.0 GPH-25 gph; transmitter is to be ordered with the meter, P/N FT4-8AEYBBLEA-0 Overall Length: 4.480 inches nominal | FTI Flow Technology Inc. (18316) | |
| FT48AX2.5LB FT48AX25LB | 6680-01-239-2317 | Transmitter, Rate of Flow | Special Features: 0.500 in. male end fittings; explosion proof; 2.5 gpm Actuation Method: Float | FTI Flow Technology Inc. (18316) | |
| FT4-8NESS-LAA-1 FT48NESSLAA1 | 6680-01-315-2743 | Meter, Flow Rate Indicating | Overall Length: 2.450 inches nominal Mounting Method: Surface panel Scale Type: Direct capacity reading | FTI Flow Technology Inc. (18316) | |
| FT4-8NESS-LEA-1 FT48NESSLEA1 | 6680-01-315-2743 | Meter, Flow Rate Indicating | Overall Length: 2.450 inches nominal Mounting Method: Surface panel Scale Type: Direct capacity reading | FTI Flow Technology Inc. (18316) | |
| FT-60 FT60 | 6680-01-514-5843 | Transmitter, Rate of Flow | Special Features: 2 pct (8-60GPH) linearity; approximately 80, 000 K factor; 1.2 psi at 30 gph and 4.8 psi at 60 gph pressure drop; 200 psi woring pressure; 2000 psi minimum burst pressure; -65 to 125 deg C temperature range; 1/4 in. female npt fuel ports Measurement Range: +0.6/+60.0 gallons per hour | Electronics Intl Inc. (3GU75) | |
| FT 6086 FT6086 | 6680-01-442-7396 | Test set, Flow Rate Indicating Me | Special Features: Measures pressure control up to 6000 psi, range of oper 0.6 to 8 gpm, temp range 50-180 deg F Test Type FOR Which Designed: Hydralic circuits Inclosure Feature: Single item W/housing | Webtec Products Inc. (0LB04) | |
| FT6370 | 6680-01-383-0784 | Meter, Flow Rate Indicating | End Item Identification: Pressure test kit 4SK777 for hemtt (heavy expanded mobility tactical truck) Special Features: Sitem is a hydraulic tester;bi-directional; remote input of flow and temperature; model HT402; pressure range 0-6000;TEMP 10-120 deg.C.;it is designed for testing hydraulic pumps, motors, valves, and hydrostatic transmissions.atof | Webtec Products Inc. (0LB04) | |
| FT-6-8A5 FT68A5 | 6680-01-139-3522 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: Any acceptable Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT-6-8A5-LJG FT68A5LJG | 6680-01-139-3522 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: Any acceptable Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT6-8AENS-LEA-2 FT68AENSLEA2 | 6680-00-925-4692 | Transmitter, Rate of Flow | Overall Length: 2.450 inches nominal Overall Height: 4.220 inches nominal Mounting Method: Flange | FTI Flow Technology Inc. (18316) UUM.United Unicef Medical Inc. (1MJF5) | |
| FT6-8AER1-PEA-1 FT68AER1PEA1 | 6680-01-440-9171 | Transmitter, Rate of Flow | END Item Identification: Pressure test set Special Features: Turbine flowmeter, stainless steel housing, ball bearing, magnetic pick-up with modulated carrier, good to 400 deg. F. Overall Length: 2.450 inches nominal | FTI Flow Technology Inc. (18316) | |
| FT-8-8A7.5-LB FT88A75LB | 6680-01-233-2740 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: GAS Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT8-8AENB-6EAA1 FT88AENB6EAA1 | 6680-01-469-0502 | Meter, Flow Rate Indicating | Special Features: Turbine flowmeter; calibrated at 10 data points, between 0.75 and 7.5 gpm blended to specified kinematic viscosity (must be specified at time of order); stainless steel; rf, amplified; configured with 3 pin ms connector | FTI Flow Technology Inc. (18316) | |
| FT8-8AENB-LEA-A1 FT88AENBLEAA1 | 6680-01-469-0502 | Meter, Flow Rate Indicating | Special Features: Turbine flowmeter; calibrated at 10 data points, between 0.75 and 7.5 gpm blended to specified kinematic viscosity (must be specified at time of order); stainless steel; rf, amplified; configured with 3 pin ms connector | FTI Flow Technology Inc. (18316) | |
| FT-8-8AENS-LEA-2 FT88AENSLEA2 | 6680-01-233-2740 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: GAS Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT8-8AEU3-LEA-1 FT88AEU3LEA1 | 6680-01-448-3528 | Meter, Flow Rate Indicating | Design Type: CASE Media FOR Which Designed: Liquid Indicator Type: Ball float | FTI Flow Technology Inc. (18316) | |
| FT-8-8M7.5-LB FT88M75LB | 6680-01-499-9989 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: Liquid Inlet Connection Size: 0.500 in. | FTI Flow Technology Inc. (18316) | |
| FT-8-8NE NW-LAD1 FT88NENWLAD1 | 6680-01-486-4273 | Meter, Impeller Type, Liquid | END Item Identification: Test stand apu Actuation Method: Turbine Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT-8A2.5-LJC FT8A25LJC | 6680-01-233-3497 | Meter, Impeller Type, Liquid | Actuation Method: Turbine Media FOR Which Designed: Liquid Inlet Connection Type: Threaded | FTI Flow Technology Inc. (18316) | |
| FT8-AEU3ULEA-1 FT8AEU3ULEA1 | 6680-01-448-3529 | Meter, Flow Rate Indicating | Design Type: CASE Media FOR Which Designed: Liquid Indicator Type: Ball float | FTI Flow Technology Inc. (18316) |