Electrical and Electronic Properties Measuring and Testing Instruments: HARS-X-5-0.1, HATSY10M, HB11696
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| HARS-X-5-0.1 HARSX501 | 6625-00-246-6315 | Resistor, Decade | Mounting Type: Bench Overall Length: 14.800 inches nominal Overall Height: 3.500 inches nominal | I E T Labs Inc. (62015) | |
| HARS-X-5-1 HARSX51 | 6625-01-418-7505 | Resistor, Decade | Environmental Protection: Moisture proof | I E T Labs Inc. (62015) | |
| HARS-X-6-.01 HARSX601 | 6625-01-286-5501 | Resistor, Decade | End Item Identification: Gpete program | I E T Labs Inc. (62015) | |
| HARS-X-6-1 HARSX61 | 6625-01-355-0254 | Resistor, Decade | Overall Length: 17.300 inches nominal Overall Width: 4.000 inches nominal Overall Height: 3.500 inches nominal | I E T Labs Inc. (62015) | |
| HARS-X-6-10 HARSX610 | 6625-01-323-2497 | Resistor, Decade | Special Features: High accuracy decade resistance substituter End Item Identification: Gpete Basic Shape Style: Irregular | I E T Labs Inc. (62015) | |
| HARS-X-7-0.1 HARSX701 | 6625-01-293-1539 | Resistor, Decade | Special Features: Binding post W/std 3/4 in. spacing plug shield terminal; switch type, 11 positions, 0-10; gold plated silver contacts, ceramic dielectric Overall Length: 17.300 inches nominal Overall Width: 4.000 inches nominal | I E T Labs Inc. (62015) | |
| HARS-X-7-.01-RM HARSX701RM | 6625-01-356-8709 | Resistor, Decade | Special Features: Urack mounted; uses non-inductive or low inductive resistors throughout the unit;uses gold plated silver contact switches; resistance temperature coefficient is less than +/-10PPM/C for 100 ohm steps and over, and less than +/-20PPM/C for 10 ohm steps and under ; power per step 0.16WATTS for 0.01 ohm; 0.25 watts for 0.1 ohm steps; 0.6 watts for 1.0, 10.0, and 100.0 ohm steps; and 0.5 watts for 1000 ohm steps and over; max current 4.0 amps at 0.01 ohms and 2.3 ma at 100KOHMS and above Overall Length: 17.300 inches nominal Overall Width: 4.000 inches nominal | I E T Labs Inc. (62015) | |
| HAT500 | 6625-01-251-9159 | Head Alignment Tester | Special Features: TI6490.11, typical application. General Characteristics Item Description: Used to measure differences in the head signal derived from reading the di-bit pattern of an alignment disc pack, front panel C/O 2 toggle switches, 1 push button switch, 2 coaxial connectors, 1 dc power connector, 3 terminal posts, 1.750 in. O/a H, 4.250 in. O/a W, 5.000 in. O/a L, includes cables | Wilson Laboratories Inc. (56164) | |
| HATS-2 HATS2 | 6625-01-250-5471 | Test set, Telecommunication Syste | Special Features: Range 20HZ to 110KHZ;RESOLUTION 1HZ;STEPPING 1, 10, 100, 1000, 10000, 100, 000HZ;DIRECT entry by numeric keyboard;handheld;max dc blocking 200V;POWER ni-cad batteries, ac adaptr;environment 32DEG F to 120 deg F, 10 to 90 deg relative humidity noncondensing;transmitter is 1004HZ fixed tone;signal level range M40 to P13 dbm;ratio range 10 to 45 db Test Type for Which Designed: Frequency Inclosure Feature: Single item W/housing | GN Nettest Boston Inc. (43295) | |
| HATS-LR-100K HATSLR100K | 6625-01-308-0535 | Resistance Standard | Special Features: L100 kohm step transfer standard; step size: 100 ohm, 1 kohm, 10 kohm, or 100 kohm; accuracy initial porm 20 ppm, accuracy transfer porm 1 ppm; calibration condition: 4-WIRE kelvin measurements, low power at 23 deg C. Overall Length: 12.300 inches nominal Overall Width: 4.500 inches nominal | I E T Labs Inc. (62015) | |
| HATS-LR-100K/HATS-LR-SB HATSLR100KHATSLRSB | 6625-01-384-3257 | Resistance Standard | Overall Width: 12.300 inches nominal Overall Height: 3.800 inches nominal End Item Identification: Cal std program | I E T Labs Inc. (62015) | |
| HATS-LR-1K HATSLR1K | 6625-01-308-0536 | Resistance Standard | Special Features: Nconsists of 12 1K ohm precision resistors which can provide values up to 12K ohms in 1K ohm steps, as selected by jumper location, not switch selectable. maximum applied input= 1500V maximum or 1 watt per resistor Overall Width: 12.300 inches nominal Overall Height: 4.500 inches nominal | I E T Labs Inc. (62015) | |
| HATSY10M | 6625-01-565-7712 | Resistance Standard | Special Features: 10 megohm step size; 11 matched resistors of R value; transfers from 0.1 megohm to 100 megohm; 1500V breakdown voltage; 12-MONTH calibration interval | I E T Labs Inc. (62015) | |
| HATS-Y-1M HATSY1M | 6625-01-295-7905 | Resistance Standard | Overall Length: 5.500 inches nominal Overall Width: 17.300 inches nominal Overall Height: 6.500 inches nominal | I E T Labs Inc. (62015) | |
| HAWKEYE 722 HAWKEYE722 | 6625-01-447-1973 | Sensor, Current | End Item Identification: Erms subsystem | Veris Industries (0VR58) | |
| HB-10844 HB10844 | 6625-00-058-7156 | Multimeter | Overall Length: 3.370 inches nominal Overall Width: 3.370 inches nominal Overall Height: 1.470 inches nominal | Dowty RFL Industries Inc. (49673) | |
| HB11056B | 6625-00-811-1543 | Galvanometer | Overall Length: 3.750 nominal inches Overall Width: 3.125 inches nominal Overall Height: 1.313 nominal inches | Dowty RFL Industries Inc. (49673) | |
| HB-11694 HB11694 | 6625-00-058-7157 | Lead, Test | Material: Copper core conductor all conductors Material: Cotton 1ST position primary insulation single conductor Conductor Form: Stranded single conductor | Dowty RFL Industries Inc. (49673) | |
| HB11695 | 6625-00-788-9897 | Lead, Test | Material: Copper core conductor all conductors Material: Cotton 1ST position primary insulation single conductor Conductor Form: Stranded single conductor | Dowty RFL Industries Inc. (49673) | |
| HB11696 | 6625-00-058-7159 | Lead, Test | Special Features: 2 support brackets Material: Copper core conductor all conductors Material: Cotton 1ST position primary insulation single conductor | Dowty RFL Industries Inc. (49673) |